Precautions of Adding Toner Powder for Copier

     Normally if there is a copier in your office, you will want to educate yourself about copier toner. There are two major types of toner on the market: bottled toner and toner cartridges. Generally speaking, bottled toner is simply plain toner in a plastic bottle. This is the type of choice for most photocopiers and is easily poured into your toner container within the machine.
     But it should call our attention that we should choose the bottled toner with quality guarantee and we should ensure the toner’s name for different models. Otherwise, it will be easier to cause problems, such as bottom powder and blanch and so on. There will be more harm than good if the toner particles are too large because it will affect the drum unit or even hurt the OPC drum. Some models of copiers have chips themselves, so we should replace the chip when adding toner. Otherwise the sign of “ alarm” will appear in the machine and then the copier will regard it as exhausted toner cartridge, which will result in that the machine can not work normally. On the other hand, toner cartridges are slightly more complex units. 
    Hotsun Imaging Products Co., Ltd. is a professional manufacturer of copier toner. We use imported component for every drum unit and the bottled toner we use are always importer from Japan, which means that our products will perform just as good as a higher-priced original cartridge - at a fraction of the original cost. If you have any requirement, please check our website for your reference http://www.hotsunimaging.com, Or please feel free to send us email for any inquiry: hotsun@hotsunimaging.com.